Colines Allrollex Line @ K2013


Colines is proud to showcase our new Allrollex line at K 2013.

Allrollex can produce:
> Manual Grade Stretch Film
> Automatic Grade Stretch Film
> Industrial Grade Stretch Film
> Cling Wrap film for Food

Colines offers technology and complete know how to produce this film.

Colines offers technology to make:

> Cast Polypropylene Film - CPP Film
> Cast Stretch Film - Stretch Film
> Hygienic Film - Metlt Embossed Film, Breathable Film, Non-Brathable Film, Diaper Film
> Air Bubble Film
> Bubbleguard Boards - Bubble Guard Technology
> Ondubol Technology
> Magnetic Gaskets


Colines will be showcasing their state of the art Cast Stretch Film line in operation. 

Visit Us at Hall 16, Stand A39

To RSVP - Click Here

For More Details Contact Us:
Colines@Hi-Techi.com
+91 22 3296 4721

illig Invitation K-2013



The IC-Thermoformer – A New Machine Generation which Thinks and Controls



Experience the new thermoformer IC-RDM 54K and IC-RDKP 72 as line.
ILLIG consistently pursue the strategy of increase in efficiency in thermoforming by employing the IC technology. This new control concept is designed for the current machine generation featuring servo driven motions in all sections of the machine. High dynamics can be achieved in the forming process using this drive concept and the process-controlled machine sequencing which can be realized with it. This results in high productivity of the thermoforming line with high quality of the formed parts at the same time. ILLIG Intelligent Control Concept now provides the possibility to the user to utilize the capacity to the full extent with only low operating effort required. The IC concept includes compatible control modules for the dynamic optimization of all processes, from simplification of machine operation and accelerated commissioning of new tools through to process control in order to eliminate environmental influences and also to improve process stability and product quality.


The Intelligent Control Concept includes several compatible modules:ThermoLineControl®
Dynamic process optimization
Compensation of ambient influences during process
Faster mold change
sas-up® (self-adaptive start-up phase)
ILLIG NetService (troubleshooting and remote diagnosis)



        

Two automatic roll-fed thermoforming lines with machines and molds of the RDKP and RDM-K series, equipped with the new IC technology, will be presented at the K stand under production conditions. RDM-K machines are specifically designed for serial production of cups of various shapes and sizes out of thermoplastic material. Roll-fed thermoformers of the RDKP series produce trays and hinged packs, used e.g. for protection of food articles during transport and presentation on the supermarket shelf. On the stand APET cups will be produced on an IC-RDM 54K machine, forming area 520 x 300 mm². The machine is equipped with an 18-up tool, i.e. more than 50,000 cups are produced per hour. Hinged packs are produced on an IC-RDKP 72 machine (forming area max 756 x 535 mm²) out of PP on a 6-up tool.

We are looking forward to welcoming you..


Visit illig at K2013
Hall 3 - Stand A52


For Further Information 
Contact Us:
illig@hi-techi.com
+91 22 3296 4721 / 22 / 23


K2013 Invitation - Hi-Tech International




For further details, please contact:

Mr. Sagar Engineer           sagar@hi-techi.com,           +91 9833921721

Mr. Sagar Bhujbal               sales@hi-techi.com,          +91 9867156000

You may also plan your visit to any of our partners before and after the K2013.

Kindly contact us to fix the appointments.


For further details
Contacts Us

Colines Invitation



Colines is proud to invite you at K 2013.

Colines offers technology to make:

> Cast Polypropylene Film - CPP Film
> Cast Stretch Film - Stretch Film
> Hygienic Film - Metlt Embossed Film, Breathable Film, Non-Brathable Film, Diaper Film
> Air Bubble Film
> Bubbleguard Boards - Bubble Guard Technology
> Ondubol Technology
> Magnetic Gaskets


Colines will be showcasing their state of the art Cast Stretch Film line in operation. 

Visit Us at Hall 16, Stand A39

To RSVP - Click Here

For More Details Contact Us:
Colines@Hi-Techi.com
+91 22 3296 4721

Hi-Tech International - K 2013 Invitation


hitech logo                       K-logo
  
INVITATION

We cordially invite you at K-2013

16th - 23rd Oct,  2013, Düsseldorf, Germany

OUR GLOBAL PARTNERS
DE_Logo_Illig_4C_claim

Thermoforming and Vacuum Forming machines,
Form, Fill and Seal machines,
Skin and Blister Forming machines

Hall 3, Stand A52
Breyer Logo.jpg

Extrusion plants for:
Clear and Technical sheets, EVA solar film, Mono and Multilayer seamless tubes for cosmetics, toothpaste, etc.

Hall 16, Stand C18

Extrusion plants for:
CPP film, Stretch film, Multilayer Cast & Blown film,
Air-Bubble film, Bubble Guard, Ondubol,  Magnetic Strip, Soft PVC gasket

Hall 16, Stand A39

Standy, Zipper and side gusseted
Pouch making machines

Hall 4, Stand A15

Laser cutting system for flexible laminates
for easy tear and security purpose

Hall 4, Stand E35
corelco logo

Plants to make:
Plastic netting for safety barrier, fencing,  geo-grills, windbreaker.
Corrugated pipes.

Hall 15, Stand A61
Meccanoplastica logo.png
Extrusion Blow Moulding,
Injection Blow Moulding

Hall 14, Stand B18
Olbrich Logo

Tailored line for
coating, printing, lacquering, embossing,
laminating, drying and winding

Hall 4, Stand A21
Ital logo

Automatic re-reelers, roll packing lines
for household and catering rolls,
Aluminium foil and paper containers plant.

Hall 3, Stand F34

For further details, please contact:

Mr. Sagar Engineer            email-symbol-4sagar@hi-techi.com,             1195445181899094722molumen_phone_icon+91 9833921721
Mr. Sagar Bhujbal              email-symbol-4sales@hi-techi.com,              1195445181899094722molumen_phone_icon+91 9867156000

You may also plan your visit to any of our partners before and after the K2013.

Kindly contact us to fix the appointments.


For Information on Entry Tickets - Click Here

For further details

Contacts Us


Breyer @ K2013 - Hall 16 Stand C18


Breyer @ K2013 - Hall 16 , Stand C18

Be invited to meet us and our innovations

As you know, the “K 2013”, the world’s largest international trade show for plastics and rubber, takes place in Düsseldorf from 16-23 October. Of course, we are part and parcel of it again and would like to cordially invite you to meet us – “Welcome to the show!”


A personal conversation and good cup of coffee are a good basis for an exchange – just visit us in our lounge at “K 2013”.
We hope you will have a good journey to Düsseldorf and look forward to you: “Nice to meet you at K 2013”.


Visit Breyer Extrusion at K2013
Hall 16 - Stand C18

News & Exhibits at Breyer in K2013

Composites solution: BREYER FiberShape


Unfortunately the BREYER FiberShape cannot be presented at our exhibition stand, but we will demonstrate its efficiency with a practical example.



Faster, easier, more efficient. Take the next step into the future with playful ease!

For automotive engineering, aerospace, shipbuilding or sports – BREYER’s gap impregnation system allows for the serial production of extremely lightweight and solid components. Fast, simple and economically efficient.


Breyer Extruder


BREYER-Extruder are extremely powerful and work very efficiently. Single screw machines with or without degasing zone. Hightorque drive or conventional drive system.



Stainless Steel Flat Die


BREYER extrusion dies are precison tools for exceptional products. You will appreciate what you get. 

At the K we show you a film extrusion die completely made out of stainless steel.



Important Developments at Breyer

Breyer Film Lines




Thermoforming film
BREYER ThermoFlex plant for PET, PP and PS thermoforming film. High performance extruders in combination with BREYER calenders for outstanding film qualities.



Solar film

With the new BREYER Cell Protect EVA extrusion line, your production will become even more efficient. The processing of reclaimed materials saves money. Modules with these films are already TÜV certified.

LI-ION electrode film
"The future is Energy": Battery calender film line for processing of electrodes for LiO batteries. With high precision-calenders from BREYER you achieve extrem low tolerances. 



Breyer Sheet Lines



Light up your life: With the BREYER BrightLine you can produce customised textured panels for LED applications. New structures allow an optimal light distribution

New 4-roll-calender

for high-performance production and best-quality sheets at the same time.

Flexibility matters! 
Take advantage of BREYER‘s flexible and efficient systems to produce sheet for technical applications.High degasing capability makes the drying obsolete and saves energy . In this way your extrusion becomes more economic. With the special fast roll-exchange device of our calenders you can quickly change between different sheet surfaces.


Breyer Tube Lines


Two successful systems:

BREYER eco·line

Everything good tube needs – for the economic production of seamless plastic tubes.


BREYER TopLine 
Today, speed is a top priority in many production processes. It's reassuring if you can refer to a technology that delivers good quality even at high speeds.

NEW: Thinner and more economical. Material savings up to 40%! For you, we have developed a new thin-walled tube, that has a fantastic feeling to it.


Visit Breyer Extrusion at K2013
Hall 16 - Stand C18

Contact Us for More Info

Phone: +91 22 3296 4721/22/23
Fax: +91 22 2661 4494
Website: Breyer

BREYER Extruder

BREYER Extruder


Ahead from the start.

One of the core elements of any extrusion system is and remains the extruder itself. Right from the start, the emphasis at BREYER is on quality and sophisticated technology.
BREYER Extruder are designed as single screw type machine running with high efficiency. Most of the common thermoplastic resins can be processed. The following sizes are available: screw diameter (mm) : 30, 35, 45, 60, 75,90, 105, 120,150, 180, 200, 250 mm
The output range (kg/h) depends from the extruder size and can reach until 2000 kg/h. Our speciality are vented extruders. They are running very economically, since Time-consuming and energy-intensive pre-drying of the resin does not exist. The venting  reduces the ratio of residual monomers to a minimum and effectively dehumidifies the raw material. On top our extruders showing a high specific output. They are working still reliable whereas other machines require already predrying of the material.



Save your energy
BREYER extruders are designed to operated with low energy use.
 All e-cabinets are equipped with Siemens control unit. The comfortable operations works via touch-display. Further equipment: solid state relais, single-current measuring, for each zone, longlife cearamic heater bands (with quick exchange connection), safety temperature control and detailed error evaluation. We are using AC drives as main drive for the extruders. On request, extremely quit running watercooled motors are available.



High customer advantage
  • Brushless, maintenance free drive technique
  • high specific output
  • lowenergy consumption
  • effective venting
  • no resin drying necessary
  • compact machine design

Profit from more than 60 years of experience in manufacturing high-performance extruders.


Visit Breyer Extrusion at K2013
Hall 16 - Stand C18

Contact Us for More Info
Phone: +91 22 3296 4721/22/23
Fax: +91 22 2661 4494
Website: Breyer

Introducing Breyer FiberShape System

Playfully lightweight – innovative materials for heavy duty performance

Keep the ball rolling with ingeniously lightweight materials – Play the game of the future with BREYER’s new FiberShape system



With BREYER’s new system your composite production becomes as easy as child’s play.
A patented process provides the ingenious solution for carbon and fiber glass reinforced composites. For automotive engineering, aerospace, shipbuilding or sports – BREYER’s gap impregnation system allows for the serial production of extremely lightweight and solid components. Fast, simple and economically efficient.


Take the next step into the future with playful ease!

ADVANTAGES:

Simply efficient: Save time with extremely short production cycles and high output. The cycle time is just 5-10 minutes – compared with other methods an especially economically efficient process.  


Simply practical: The production of your molds is easy. The system has an uncomplicated setup and is easily accessible. Strongly automated technology and high reproducibility perfect your production processes.


Simply cost-efficient: With BREYER you produce your products in a costefficient and energy saving way. Different thicknesses are possible with just one tool. Save materials, energy, and tools. 


Simply cutting-edge: Your components are extremely lightweight and stable. Achieve high-quality surfaces on both sides that can be lacquered right after their production and make surface treatment a thing of the past.  



Visit Breyer Extrusion at K2013
Hall 16 - Stand C18

Contact Us for More Info
Phone: +91 22 3296 4721/22/23
Fax: +91 22 2661 4494
Website: Breyer

ILLIG's new FSL 48 – Redefining the Standards

ILLIG's new FSL 48 – Redefining the Standards in hygienic decorative packaging of dairy products
The new FSL 48 – hygienic & decorative filling and packaging of dairy productsThe hygiene levels supported by the new FSL 48 range from thermoforming IML-decorated cups with sterile air through a configuration with an all-enclosed filling section to the optional sterilization of lid foil by UV irradiation. Moreover, the machine's newly developed multi-track filling unit is designed to provide CIP (cleaning in place) and SIP (sterilization in place), making it generally suitable for aseptic filling. Thus, the FSL 48 delivers filling and packaging capabilities which reliably conform to diverse standards up to VDMA Hygiene Class IV for hygienic filling equipment. Thanks to the multi-track filling unit, cups can be filled with up to eight different product varieties at the same time. The new FSL 48 can process all customary sheet stock suitable for FFS lines, e.g., PS, PP, multilayer materials (e.g., PS/EVOH/PE), APET, and even stock made of PLA (polylactide) organic polymers. The same applies to the heat-sealable lid material.
The new forming, filling and sealing machine FSL 48 is cut out for the task of hygienic filling and packaging of dairy products – including, e.g., product families of differently flavored varieties – in thermoformed IML-decorated cups.

The format surface area of 480 mm x 320 mm (or up to 350 mm in the case of non-decorated articles) makes it possible to accommodate the output of one complete cycle – e.g., 12 standard curd cheese packs – in a carton compatible with the Euro pallet module following sealing and separation of the cups from the web. This format size is adaptable to obtain single or dual cups, or 4- or 6-cup trays. The machine's controlled, exclusively servomotor-driven movements result in a very smooth operation, so that even highly liquid products can be filled into single-serve packs at rates exceeding 30 cycles/minute without product overspilling onto the sealing rim. 

Apart from the machine version with integrated IML unit (FSL 48 model), the basic machine is also available in its FS 48 standard form for thermoforming, filling and sealing single-serve packs or other non-decorated foodstuff containers. Any configuration of this FFS machine – whether FS 48 or FSL 48 – can be combined with a carton packer matching its output capacity. The packer, which is also servomotor-driven, features an automatic carton erector and can handle any kind of carton, from trays to open-top to wraparound types.

IML: Brilliant custom decoration of a broad diversity of cup geometries
The IML unit developed for the FSL 48 uses printed pre-cut labels supplied from a storage magazine. These labels are placed in the mold cavity and become integral with the cup wall in the subsequent thermoforming cycle. Since the IML process does not require vertical container walls, this decorating method provides the additional benefit of supporting a broad diversity of cup shapes for improved visual impact on the supermarket shelf. Indeed, IML opens up a broad range of cup decorating options – from one-sided, two-sided or three-sided (e.g., U-shaped) to four- or even five-sided (including a bottom decoration, e.g., with an integral bar code) designs – to combine high visual appeal with superior functionality. Depending on the cup material, the technology supports matching PP, PS or paper labels. The IML unit is integrated directly into the molding station and requires no more floorspace than a conventional banding unit.

The IML unit of the FSL 48 machine withdraws labels printed in brilliant photo quality from a storage unit and transfers them into a mold cavity. Diverse cup geometries are supported. Even the bottom of the cup may be used – e.g., to apply a large and easy-to-read bar code without interfering with product design.

Another advantage of the IML technology employed consists in the fact that each mold cavity can accommodate a differently printed label. Such versatility is helpful in filling and packing product families, which is basically made possible by the multi-track filler configuration. Product changes too are quick and easy to implement with this technology.

Inserting the labels into the mold adds an additional operating step to the thermoforming workflow. In the interests of attaining maximum productivity (i.e., high cycle rates) despite this requirement, the label is inserted concurrently with the ongoing molding step outside the closed mold. To this end, the lower part of the mold is in the shape of a fourfold cube which rotates through 90 deg. in every cycle. Each printed label is inserted and fixed in the cavity with the lower mold part awaiting its next 90-deg. turn into the molding position. At the rate of 30 cycles/minute that can thus be achieved, and with the useful sheet stock area sized to yield, e.g., 12 standard curd cheese packs, the machine will thus deliver 21,600 single-serve packs per hour – hygienically filled and sealed into a custom-designed container of high decorative appeal for sustainable presentation on the POS shelf.



Visit illig at K2013
Hall 3 - Stand A52

For Further Information 
Contact Us:
illig@hi-techi.com
+91 22 3296 4721 / 22 / 23